31.5" FEVA-12 Color Servo Drive
Model; TOTALFLEX 800 / 8Color + 4Color Manufacture Date: 2015


General Capabilities:

Maximum Web Width; * 31.5" (800mm)
Minimum Web Width; * 15.75" (400mm)
Maximum Print Width; * 31.5" (800mm)
Material Capabilities; * 1 to 5 mil Papers, Films and Some FoilUp to 140 gr/m2
* 40" Max OD (1016mm) Unwind
* 31.5" Max OD (800mm) Rewind, with Taper Tension
Printing Colors; * 8 on a 10 Color Drum (3 Dryers after Station #1)
* 2 in the First Downstream CI unit
Can be either, 2 color front OR 2 color back
* 2 in the Second Downstream CI unit
2 color front with 1 being a Possible UV Coating Station
ANY repeat available; * Minimum Print Repeat; *13.00" (330mm)
* Maximum Print Repeat; *24.00" (610mm)
* Print Sleeves have a +/-5mm Repeat Tolerance…
That is, ex. a 400mm print sleeve can be used to
produce any repeat between 395mm and 405mm
Mechanical Web Speed; * 450 Meters / Minute (1476 Feet / Minute)
Operations & Features; * Press Colors White RAL 9001 + Green RAL 5020
* Continuous roll to roll operation, with roll turrets and automatic
on the fly splicing at each end of the press.
* Unwind and Rewind station Webguides.
* Pillar 10 Kw Corona Treating (front and/or back).
* Web Camera Systems;
* Promark Premius Digital 3 for front copy
With Automatic Print Register Control, and
Automatic Defect Detection
* Promark Super Handy Scan 4000 for back copy.
* UV coating capabilities with (2) 400 watt per inch, PRIME UV lamps
* Rossini Automatic CI Drum Cleaner
* Temperature Controlled CI Drum.
* Temperature Controlled Downstream CI Drums
* Chill Rollers after Downstream CI Section
* Battery Back-Up for Wash Up due to Power Outages
* Explosion Proof Design for Solvent or Waterbased Inks
Control Panel Locations
* Main Console in Front of Press
* External Side of Main CI Drum; Pendant
* Internal Side of Main CI Drum; Pendant
* Internal Side of Downstream CI Drums; Pendant

31.5" FEVA GENERAL SPECIFICATIONS

Air Pressure; *Pressure In Line: 8.0 Bar (116 PSI)
* Working Pressure: 6.0 Bar (87 PSI)
* Consumption: 200 Liters / Minute
Power Requirements; *480v 3 Phase……1200 Amps Total
* Frequency 60Hz
* Auxiliary Voltage 110/115v Single Phase
Automatic Turret Unwind Includes;
* Two (2) 3" Core ID, Expandable Shafts
* Two (2) 150-152mm Core ID, Expandable Shafts
Automatic Turret Rewind Includes;
* Two (2) 3" Core ID, Expandable Shafts
* Two (2) 150-152mm Core ID, Expandable Shafts
12 Print Stations, Including;
* Automatic Print Pre-Registration
* Eight (8) Stations on a 10 Color CI Drum
* 94 Kw (200º f max) Hot Air Drying Between All Stations
* Stations #2 & #3 Replaced With Additional Dryers for First Color Down
* Overhead Final Drying Tunnel with Eleven Pitched Baffles
* One (1), Two Color Downstream CI for Frontside Or Backside Printing
* One (1), Two Color Downstream CI for Frontside Printing
* Last Station is UV Capable, with Twin 400w Prime UV Lamps
* Twelve (12) Electric Automatic/Manual Inking and Wash-Up Systems
* Sixteen (16) Enclosed Chamber Doctorblade Assemblies
* Sixteen (16) Ink Spill Drip Trays
* 360° Longitudinal Print Register
* Sidelay Register Control with 10mm Range
* + / - 37 Various Line Count Ceramic Anilox Sleeves (See List)
BCD 4.767" (121.07mm +.015)
* + / - 98 Various Repeat Print Sleeves (See List)
BCD 4.858" & 6.116"
* + / - 13 Various Width Photoflex Floodcoat Sleeves
BCD 4.858"
* Twelve (12) Print Sleeve Bridge Mandrels, Twenty Inch Starting Point
BCD 4.858", OD 6.116"
* SYS TEC Vision Plus 1000 Video Platemounter with:
Plate Clamping Mounting Table
4.858" Mandrel
6.116" Bridge Sleeve Mandrel