45" UTECO
MODEL ONYX 876 GL 10 COLOR


MANUFACTURED DATE Oct-07
HOUR METER; AS OF 5/10/2017 26634.7
COLOR(S) WHITE RAL 7035 + GREEN RAL 5021

GENERAL SPECIFICATIONS:
MAX. PRINT WIDTH 43.5" (1105mm)
MAX. WEB WIDTH 45" (1150mm)
PRINT REPEAT (0.015 Tape + .067 Plate) 12.99" to 30.7" (330mm to 780mm)
Set in Increments of 0.1mm to a Max of +/-3mm
UNWIND CAPACITY
MAXIMUM ROLL OD 39.37" (1000mm)
MAXIMUM ROLL WEIGHT 3300 Pounds (1500 Kg)
AUTOMATIC SPLICE Min OD 15.7" (400mm)
SIDELAY REGISTER 1.9" (48mm)
REWIND CAPACITY
MAXIMUM ROLL OD 39.4" DIA. (1000 mm)
MAXIMUM ROLL WEIGHT 3300 Pounds (1500 Kg)
TAPER TENSION UP TO 80%
CI DRUM DRIVE, PRINT SLEEVES, AND
ANILOX SLEEVES SYNCHRONOUS AC MOTORS (SERVO)
MAX. MECHANICAL SPEED 1197 Feet per Minute (365 m/min)
LUBRICATING SYSTEM
PRINTING MANDREL BEARINGS AUTOMATIC
OPERATOR SIDE SUPPORTS MANUAL, EASY ACCESS
CONTROL PANEL IN FRONT OF PRESS AND AT EACH OF 3 "BANKS" OF PRINT STATIONS
AIR PRESSURE 6 BAR (86 PSI)
AIR CAPACITY 750 Liters/Min
POWER REQUIREMENTS 480 V 3 PHASE
FREQUENCY 60 HZ
AUXILIARY VOLTAGE 110/115 V SINGLE PHASE
SUBSTRATES PAPER, FILMS, & FOIL
SUBSTRATE RANGE 0.001" TO 0.015"
PRESS TENSION RANGE 11-132 Lbs. (5-60 Kg)
EXPLOSION PROOF DESIGN SOLVENT BASED AND WATER BASED INKS
DIRECTIVES MANUFACTURED TO UL508A AND
NFPA79 STANDARDS
GENERAL OPERATIONS:
* Continuous roll to roll operation, with automatic roll turrets at
each end of the press.
* Front, Back, or Both sides of web, Corona Treatment, with
Ozone Destruct Unit
* 10 Print color stations with the following options:
*Up to 7c Front + 2c Back + Floodcoat Varnish Front
*Up to 7c Front + 2c Front + Floodcoat Varnish Front
* Apply Waterbase, Solvent, or UV Coatings in 10th Print Station
* Slitting with web spreader (bowed) roller.
* Computer Storage for up to 5,000 Jobs
K:\FLEXO DEPT STUFF\PRESS 45\45 Sellable\Specs n Features 45 Press 10.24.2014
45" PRESS FEATURES Page 2 of 3
4* OPERATOR REMOTE CONTROL PANEL/PENDANTS
1 *MAIN CONSOLE TOUCH SCREEN MONITOR
1 *INTERNAL SIDE OF CI DRUM, PENDANT
1 *EXTERNAL SIDE OF CI DRUM, PENDANT
1 *TWO COLOR DOWNSTREAM STACK UNIT, PENDANT
4 VARIABLE PRESS TENSION ZONES, 5-60 Kg (11-132 LBS)
1 AUTOMATIC TURRET UNWIND "TA-U 1000", INCLUDES…
2 3" CORE ID, EXPANDABLE SHAFTS
2 150mm CORE ID, EXPANDABLE SHAFTS, WILL ALSO HOLD 6" ID CORES
1 15 KW , PILLAR CORONA TREATER, FOR FRONT, BACK, OR BOTH SIDES OF WEB
UPGRADED ON 4/1/2010
1 OZONE DESTRUCT UNIT FOR CORONA TREATER EXHAUST, UPGRADED 6/1/2010
1 FIFE ELECTRONIC SENSING INFEED WEBGUIDE
1 ELETTRA AUTOMATIC DRUM WASHING UNIT, INSTALLED 12/1/2010
10 PRINT STATIONS, INCLUDING…
1 AUTOMATIC PRINT PRE-REGISTER, WITHIN 2mm
7 COLORS ON 8 COLOR FRAME, WITH 118 Kw (212º f max) HOT AIR DRYING
BETWEEN COLORS, AN EXTRA IR AND HOT AIR DRYER IN STATION
#2 FOR ADDITIONAL DRYING OF FIRST DOWN COLOR (WHITE),
AND A 140 Kw (250º F max) 13 FOOT OVERHEAD DRYING TUNNEL
2 COLOR STACK UNIT FOR FRONT OR BACKSIDE PRINTING, WITH 118 Kw
HOT AIR DRYER BETWEEN COLORS AND 7 FOOT DRYING TUNNEL
1 CORAL NONREGISTERING COATING UNIT FOR WATERBASE,
SOLVENT, OR UV COATINGS, WITH 118 Kw 7 FOOT DRYING TUNNEL
AND THREE 400 WATT PER INCH GIARDINA UV LAMPS
9 DIAPHRAGM INK PUMPING SYSTEMS
3 GRAYMILLS M3 10 GALLON PNEUMATIC PUMPS FOR CORAL DECK
WITH 4 SPARE 60 MESH FILTERS & SPARE GASKETS
9 360 DEGREE LONGITUDINAL PRINT REGISTER
10 SIDE REGISTER CONTROL, 8mm RANGE
7 AUTOMATIC WASH-UP SYSTEM FOR 7 COLOR DRUM PRINT STATIONS
UPGRADED IN 2014
7 AUTOMATIC Ph/VISCOSITY CONTROL FOR 7 COLOR DRUM PRINT STATIONS
UPGRADED IN 2013
+/- 45 ONYX STATION CERAMIC ANILOX SLEEVES (SEE LIST) BCD 5.143"
3 CORAL COATING STATION CERAMIC ANILOX ROLLS (SEE LIST)
+/- 300 VARIOUS PRINT SLEEVES (SEE LIST) BCD 3.889" & 6.116"
+/- 273 ONYX STATION VARIOUS REPEATS
+/- 24 ONYX STATION VARIOUS FLOODCOAT WIDTHS
+/- 9 CORAL STATION VARIOUS FLOODCOAT WIDTHS
9 PRINT SLEEVE BRIDGES, 20" REPEAT STARTING POINT 6.116" BCD
15 ENCLOSED CHAMBER DOCTOR BLADE ASSEMBLIES
12 SPILL / DRIP PANS
K:\FLEXO DEPT STUFF\PRESS 45\45 Sellable\Specs n Features 45 Press 10.24.2014
45" PRESS FEATURES Page 3 of 3
1 PROMARK PREMIUS DIGITAL 3 VIDEO INSPECTION UNIT FOR FRONTSIDE PRINT
INSPECTION, WITH AUTOMATIC REGISTRATION CONTROL, AND
AUTOMATIC COLOR MONITORING, UPGRADED ON 4/1/2014
1 PROMARK SUPER HANDYSCAN 4000 VIDEO INSPECTION UNIT FOR
BACKSIDE PRINT VIEWING, WITH AUTO TRAVERSE
1 GRAPHIC VISION 500 SERIES DIGITAL WEB VIEWER WITH AUTO TRAVERSE,
FOR FRONT OR BACKSIDE DOWNSTREAM DECK VIEWING
1 GRAFIKONTROL AUTOMATIC REGISTRATION SYSTEM FOR DRUM TO STACK UNIT
1 FIFE ELECTRONIC SENSING OUTFEED WEBGUIDE
4 SHEARKNIFE SLITTING UNITS
1 MOTORIZED BOWED ROLLER
1 KONGSKILDE 5hp VENTURI TRIM REMOVAL SYSTEM
1 AUTOMATIC TURRET REWIND "TA-R 1000", INCLUDES…
2 3" CORE ID, EXPANDABLE SHAFTS
2 150mm CORE ID, EXPANDABLE SHAFTS, WILL ALSO HOLD 6" ID CORES
1 BIEFFEBI UNICA-343-1350 PLATEMOUNTER, WITH CLAMPING MOUNTING TABLE,
AND TWO 20" SLEEVE BRIDGES (1 new 10-1-2013)
1 AEC GPAC-90 CHILL UNIT, FOR MAIN DRUM AND 2 DOWNSTREAM CHILL DRUMS
Upgraded 9/1/2012
1 AEC TCU-500-O CHILL UNIT FOR UV CURING SYSTEM
Upgraded 9/1/2012
1 MGE GALAXY 3000 BATTERY BACK-UP SYSTEM FOR PRINTING UNITS
1 MISCELLANEOUS SPARE PARTS PACKAGE
1 30 HP MAIN DRUM MOTOR
2 SPARE PENDANT CONTROLLERS
1 CORONA TREATER MAGAZINE
2 UNWIND/REWIND SPLICING BLADES
3 ENCODERS
1 TENSION ROLLER TRANDUCER
3 ANILOX MOTORS
2 DRIVES
1 MISCELLANEOUS SPARE PARTS